Duct Air Cleaning D-I-Y Guide

Duct cleaning can be good for the indoor air quality of your house. Ducts tend to accumulate dust with time when not cleaned for a long time. Whether it’s duct, deris, pest infestation, mold development, ducts may be dirty with various things. If your ducts are not clean they can cause allergies and respiratory disorders in the people living inside the house. They cause bad smelling indoor air.

Here Is The Guide Of Air Duct Cleaning At home

Before you start make sure you have all the necessary equipment and safety measures to ensure safe duct cleaning. If your ducts are not accessible by simply removing the vent, if it is conceleased behind the wall and reaching it is difficult, we suggest you all professionals.

Here Are Few Things You Will Need

Gloves : Gloves are necessary to make sure you are safe from getting your hands dirty. You will be able to work properly without getting squeamish. Proper heavy duty gloves can save you from metal pieces, sharp edges and metal cuts or pokes.

Dust Mask : Your ducts will have a lot of dust. When you agitate it to clean it, the dust will fly everywhere. Without a proper mask you will suffocate or breathe in the duct. The dust may have allergens that can cause eye irritation and coughing fit.

Screwdrivers : Screwdrivers with proper sizes will be needed to operate in the ducts.

Rags : Rags will be needed to clean the surface of the duct of the dust and dirt.

Vacuum : Vacuum cleaner with a long hose to reach places where you can physically reach, will be needed too.

Brush With a Long Handle : To scrub the places, remove dnagerling, remove mold and other things from the surface of the duct, you will need a brush with a long handle to reach far places.

The Process

Remove the tubing and the grilling plates from the air vent. Temporarily cover paper towels or cloths in your air supply registers. Slightly lift up the uncrewed register and tuck under it a towel to keep the towel. This stops the rooms from containing dust when you are washing. Set the “wind” location to your thermostat. The fan helps to move the dust you lose during purification. Check that the cool mode and heat are off. If you do not have a ‘wind only’ mode in an older thermostat, control the thermostat. Set the “wind” location to your thermostat. The fan helps to shift the dust you lose during purification. Check that the cool mode and heat are off. If you do not have a ‘wind only’ mode in an older thermostat, control the thermostat. Using the brush to release the dust in the ducts. A gentle scraping of the brush loosens clumps of dust within the tubing.Uncover and elevate at a time one supply file. Using the shaft to absorb some fan-filled particles. Using the shaft to brush the dust as thoroughly as possible. Clean the brush and vacuum one by one registers of the return dirt. Until adding, clean each duct cover and grilling pan. Switch polluted air philtres from HVAC to air. If HVAC philtres are obstructed with the dust and chemicals they are meant to remove, you will not gain full benefit from clean ducts.

Is DIY Duct Cleaning Safe?

Unfortunately, DIY duct cleaning is not safe. Most of the time you risk hurting yourself or the duct while cleaning it. Without expected help and DIY equipment, you might end up losing parts, and damaging stuff. Also, the cleaning won’t be as effective and you will probably end up spending the same amount of money on supplies, plus the added headache. Professionals will have the experience and proper means to help you. If you want to increase the efficiency of your HVAC system, save money on electricity bills and get an overall better cleaning done, we suggest you hire a local DUCT cleaning company.